 |
Legend 37’ Walk Around |
  |
| Dimensions |
Specifications |
| Length (LOA) |
37’ (11.28 meters) |
| Beam |
12’ (3.66 meters) |
| Draft |
28” (0.7 meters) |
| Dead rise (Transom) |
23.5 degrees |
| Displacement, approx. |
12,500 lbs. (dry) (5,669 kilograms) |
| Fuel Capacity |
500 gal. Standard (1,893 liters) |
| Water Capacity |
50 gal. (189 liters) |
| Engine choices (2X) |
MAN D0836LE (450HP) |
| |
YANMAR 6LY2ASTP (440 HP) |
| |
CATAPILLER C-7 (461 HP) |
| |
CATAPILLER C-9 (550 HP) |
| |
CUMMIMS QSC 8.3 (600 HP) |
|
Standard equipment |
Hull
|
Oven cured pre-preg epoxy resin |
|
Kevlar/E-glass hybrid multi-directional (0/90/+45/-45) stitched fabric reinforcement |
|
S-glass multi-directional (0/90/+45/-45) stitched fabric reinforcement |
|
Bottom, sides, and transom, cored with high temperature Corecell P 600 |
|
Molded carbon fiber stringers with intergraded fuel and water tanks |
|
All materials are hand laid, vacuum bagged and post cured (175deg.) in a single step to create a monolithic structure |
|
Molded recessed zinc pocket with flow thru cover, flush with transom |
|
Molded recessed trim tabs |
|
Molded pressurized self cleaning sea chest |
|
Propeller tunnels (40% diameter of propeller with 10% tip clearance) |
|
Discharge water (bilge, drains, and a/c discharge) exits via scupper boxes, no other hull penetrations exists |
|
Stainless steel rub rail on a seamless sheer ( mold seam is 4 inches inboard on the deck) |
|
Clear-coat polyurethane finish throughout bilge and engine room areas over Kevlar and carbon fiber fabrics |
|
Hull sides Awlgrip polyurethane finish (owners choice of color) |
|
Custom boot striping |
|
Bottom paint, 2 coats anti-fouling |
|
Molded recessed log for flush mounting transducers |
|
Deck
|
Oven cured pre-preg epoxy resin |
|
S-glass |
|
Multi-directional stitched fabric reinforcement |
|
Carbon fiber woven multi-directional reinforcement |
|
Cored with high temperature Corecell P 600 |
|
Cored with anti-compressive close cell foam at all mounting points (cleats, rod holders, tower legs) |
|
All materials are hand laid, vacuum bagged and post cured (175deg.) in a single step to create a monolithic structure |
|
Anchor locker with flush mounted hinges |
|
Awlgrip polyurethane finish (owners choice of color) |
|
Bow chocks (2) 6 inch CNC machined from anodized billet aluminum, |
|
Bow cleats (2) 10 inch CNC machined from anodized billet aluminum, |
|
Spring cleats (2) 10 inch CNC machined from anodized billet aluminum |
|
Helm deck
|
Seating for 6 adults (2 helm seats) |
|
L – Shaped seating with storage underneath that converts into a double berth (starboard side) |
|
Large helm console capable of holding 4 large monitors with view through cover |
|
Palm beach style helm pod with single leaver controls made of CNC machined anodized billet aluminum |
|
Compass with light, flush mounted |
|
Engine instrumentation |
|
Emergency engine shut downs |
|
Custom switch panel |
|
Companion-way door |
|
Drink box on helm console |
|
Engine access hatch with stainless steel gas shocks |
|
Custom cushions with closed cell foam on all seating (can be used for flotation) |
|
Courtesy lighting |
|
Fire and bilge water level alarms, audible with warning lights |
|
Custom helm wheel made of CNC machined anodized billet aluminum |
|
Cockpit
|
Port and starboard gaff / rod lockers |
|
Shore power connections, port and starboard sides |
|
Rod holders (Rupp) x4 |
|
Large tackle center (owners choice of draw configuration) |
|
Bait freezer |
|
Bait prep sink |
|
Rigging station |
|
Saltwater wash down |
|
Fresh water wash down |
|
Large removable insulated fish box with macerator pump-out system |
|
Insulated drink box in step |
|
60 gal. live bait well with observation window and halogen light (water proof) |
|
Self bailing cockpit with deck drain covers custom made of CNC machined anodized billet aluminum |
|
Backing plate for fighting chair |
|
Transom door with custom latch custom made of CNC machined anodized billet aluminum |
|
Courtesy lighting under gunwells, 12 volt halogen |
|
Stern cleats 10 inch, custom made of CNC machined anodized billet aluminum |
|
Transom haws pipes custom made of CNC machined anodized billet aluminum |
|
Tuna tubes, 2 either side of bait well, 12 & 120 volt |
|
Non-skid surface |
|
MECHANICAL
|
Acoustic and thermal insulation |
|
Bilge pumps, automatic/ manual (3) Rule 2000 with ultimate switches, and indicator lights |
|
Double constant toque 316, stainless steel clamps on engine exhaust hoses |
|
Double 316 stainless steel hose clamps on all hose fittings where possible |
|
Emergency bilge suction valve on one main engine (crash pump) |
|
Engine room blowers, reversible Delta T, 12 volt |
|
Engine room demister, Delta T |
|
Bait well pumps, 12 volt and 110 volt |
|
Automatic fire suppression, halon |
|
Fresh water cooling on main engines |
|
Fuel filters/water separators, Racor |
|
Fire retardant fuel lines |
|
Engine hour meters (2) |
|
Bilge alarm for high water (3) |
|
Integrated tanks, fuel, water, and black water |
|
Hot water heater, stainless steel, 6 gallon, 110 volts |
|
Hydraulic steering |
|
Propellers, custom high performance nibral |
|
Rub rail, stainless steel |
|
Rudders, high performance CNC machined stainless steel, using Tides dripless bearings and carbon fiber upper supports |
|
Sea chest with heavy-duty stainless steel seacocks; self-cleaning and pressurized, 6 psi at 35 knots |
|
Aqua-met 22 stainless steel shafts, 2 inch, fitted with composite shaft tubes |
|
Struts, high performance, recessed and faired flush with bottom of hull. |
|
Tides Drip-less shaft seals |
|
Oil change system, main engines, generator, and transmission |
|
Trim tabs, hydraulic and recessed |
|
Pressurized fresh water system 12 volt |
|
Pocketed recessed transom Zinc |
|
Electronic trolling valves |
|
Overboard drain manifold discharging via aft scuppers |
|
Custom stainless exhaust risers |
|
Engine alarm system |
|
Bonding system with transom zinc plate |
|
Holding tank, 12 gallon, integrated with monitor, macerator, and dockside discharge |
|
Integrated oil holding tank |
|
Von Widman under water exhaust system |
|
ELECTRICAL
|
5 KW freshwater cooled diesel generator with remote start, instrumention, safety shutdown, and waterlift muffler |
|
Custom AC/DC electric distribution panel |
|
Voltmeter and ammeters |
|
Reverse polarity indicator |
|
Battery parallel switch 3-way |
|
Battery condition indicators (3) |
|
Vapor proof battery switches (3) |
|
Batteries drycell heavy-duty marine (5) |
|
Bonded electrical system |
|
Circuit protection throughout |
|
Engine room lights 12 volts |
|
Cabin lights, 12 volt halogen |
|
Receptacles 110 volts duplex, ground fault protected |
|
Tinted copper wire throughout |
|
Battery on/off switch |
|
Tank gauges, fuel, potable water, and black water |
|
50' shore cord (1), 30 amp shore power |
|
Battery charger, 70 amp automatic with thermal cut out |
|
Battery on/off switches, vapor-proof |
|
Horn supplied, uninstalled for tower installation |
|
Navigation lights, uninstalled for tower installation |
|
Airpax 2 wire system |
|
CABIN
|
Custom designer interior décor, owners choice of veneers, custom trim, superbly jointed and finished |
|
AC duplex outlet/GFI protected |
|
Access hatch to bilge |
|
Air conditioning/heat including; 10,000 BTU capacity |
|
Diagonal double bed portside with 5" mattress, coverlets |
|
Hanging locker, cedar lined, starboard side |
|
Lighting - recessed halogen (6) |
|
Port side rod storage for up to 8 rods with #50 wide reels |
|
Positive latches used on all cabinet doors and drawers |
|
Selection of fine quality fabrics and coverings throughout |
|
Stereo AM/FM CD/DVD |
|
Portside lounge converts to upper and lower sleeping berths |
|
Overhead cabinets |
|
Hanging lockers, cedar lined |
|
Vinyl headliner with recessed 12-volt lighting |
|
Outlet, 110 volts duplex |
|
Storage compartments and large drawers below bed |
|
Flat screen TV |
|
Upholstered dressing seat |
|
Hanging locker, cedar lined |
|
Halogen reading lights at head of berth |
|
GALLEY
|
AC duplex outlet, GFI protection |
|
Ceramic cook-top, one burner, recessed with Corian cover |
|
Corian counter top with custom Corian sea rails |
|
Positive latches used on cabinet doors and drawers |
|
Side by side refrigerator/freezer |
|
Counter top lighting - recessed halogen (3) |
|
Microwave/convection oven |
|
Storage cabinet and drawers, oak sides and cedar bottoms |
|
Sink, deep with dual faucet lever |
|
HEAD
|
AC duplex outlet/GFI protected |
|
Corian counter top, custom |
|
Custom vanity |
|
Head, Vacuflush electric, with holding tank and pump out system |
|
Framed mirror |
|
Positive latches used on cabinet doors and drawers |
|
Separate stall shower with automatic shower sump pump |
|
Toiletry storage cabinet |
|
Recessed halogen lighting, DC |
|
Sink with dual faucet level |
|
|
|
